This README contains information regarding the USB device drivers
needed for communication with Locosto based devices.

csstusb.inf & csstusb.sys

These two files install the USB device driver used for reprogramming
the Locosto chipset. This is only necessary if the USB_BOOT pin of
the Locosto is tied high. Immediately following power on, the Locosto
attempts to connect to the reprogramming tool, CSST, for the first
4-5 seconds.

Enabler_IIIG.inf & PhSerUsb.sys

These two files install the USB device driver used to create one or
more virtual COM ports. These COM ports will attempt to enumerate
immediately if USB_BOOT is low, or after 5 seconds if USB_BOOT is
high.



In general, this 'drivers' directory can be used for both
installations. Microsoft is smart enough to search through the
.inf files looking for the proper VID and PID.
